- Canon EOS Rebel T2i -- Jan 24 2012 5:53 am -- 35 Comments
- Common Camera Error Codes And What They Mean. -- Jan 21 2012 12:52 pm -- 1 Comments
- A Sarcasm Font -- Jan 21 2012 11:48 am -- 45 Comments
- Belkin n52te -- Jan 21 2012 10:38 am -- 6 Comments
- Garmin Nuvi 1450T -- Jan 21 2012 9:34 am -- 14 Comments
HP Officejet J6480 All-in-One Printer
Consumers have noted the following concerns, they may be of interest to you if you are researching a product before purchase.
This list may not be complete. The updating process is manual, it requires your feedback to notify us of other issues, manufacturer supplied fixes, product recalls or other information which might affect this entry. If you would like to submit an issue or other information you can do so here. or leave a comment below. All feedback is welcome.
- You cannot use a wired & wireless connection simultaneously.
- Most complaints of this printer revolve around the drivers and software.
- No PictBridge support.
- only three autodial fax buttons.
- slower than average photo prints.
Most problems relating to drivers and software can be worked around by resetting the printer and making sure the paper settings in the print driver match the paper settings for the installed paper tray. These tasks are performed as follows :
Check Paper
- Open a document to print.
- Click File , click Print , and then click Properties . The product Properties dialog box appears.
- Click the Paper/Quality tab.
- Choose the appropriate paper size from the Size is drop-down menu.
- Choose the appropriate paper type from the Type is drop-down menu.
- Click OK and then click OK again to print the document.
Reset
- Without turning the printer off, remove the power cord from the back of the printer.
- Wait 30 seconds and then plug the power cord into the back of the printer.
If you have found this pages information useful please help out the community by adding a comment or submitting an issue, fault or problem to this or another products entry. The site relies on user input and feedback to in order to remain accurate, impartial and useful.
If you are looking for drivers or support for this item and there is no information here or in the info box then the company listings found here may be helpful. Each company entry has links to:
- Support pages.
- Support forums
- The company homepage
- User submitted news or information relevant to the consumer.
If you would like to submit an issue of your own you can do so here. Or leave a comment below.
Problems after power went off during storm when power returned the printer had problems powering up fully.
Printer would keep starting to power up over an over with no real power-up.
Tried Partial reset:
1. Unplug printer for 30 seconds
3. Press # and 3 together while plugging printer back in. (may take two people)
Also tried full reset:
1. Unplug printer for 30 seconds
2. Press # and 6 together while plugging printer back in. (may take two people)
Still not working:
HP used to be the best dependable printer, not any more.
This is my last HP printer they want me to replace this printer, not a chance.
Hp could provide more documentation to help out of Warranty printer that have not been used Heavily.